OpenVPN - Can't ping LAN machines on remote side

local 193.xxx.xxx.2push "route 192.186.0.0 255.255.255.0"port 1194proto udpdev tunca ca.crtcert server.crtkey server.keydh dh.pemauth SHA512tls-crypt tc.keytopology subnetserver 10.8.0.0 255.255.255.0push "redirect-gateway def1 bypass-dhcp"ifconfig-pool-persist ipp.txtpush "dhcp-option DNS 1.1.1.1"push "dhcp-option DNS 8.8.8.8"push "block-outside-dns"keepalive 10 120cipher AES-256-CBCuser nobodygroup nogrouppersist-keypersist-tunverb 3crl-verify crl.pemexplicit-exit-notify

How am I able to make it so my OpenVPN connection can ping other machines in the LAN using 192.168.0.0/24 range.

ip a

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000    link/ether 02:00:00:20:a1:02 brd ff:ff:ff:ff:ff:ff    inet 193.xxx.xxx.2/24 brd 193.138.195.255 scope global eth0       valid_lft forever preferred_lft forever    inet 192.186.0.2/24 brd 192.186.0.255 scope global eth0       valid_lft forever preferred_lft forever    inet6 fe80::ff:fe20:a102/64 scope link       valid_lft forever preferred_lft forever3: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 100    link/none    inet 10.8.0.1/24 brd 10.8.0.255 scope global tun0       valid_lft forever preferred_lft forever    inet6 fe80::1f00:d21:971c:27a/64 scope link stable-privacy       valid_lft forever preferred_lft forever

ip r

default via 193.xxx.xxx.1 dev eth0 proto static10.8.0.0/24 dev tun0 proto kernel scope link src 10.8.0.1192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.2193.xxx.xxx.0/24 dev eth0 proto kernel scope link src 193.xxx.xxx.2

Client config

clientdev tunproto udpremote 193.xxx.xxx.2 1194resolv-retry infinitenobindpersist-keypersist-tunremote-cert-tls serverauth SHA512cipher AES-256-CBCignore-unknown-option block-outside-dnsverb 3