OpenVPN Access Policy
I have an OpenVPN server that has clients connecting automatically, which works and is expected. Each profile is specific to each peice of hardware and gets the next ip address in the range (dynamic...
View ArticleProblem: kernel: DROP_INPUT in openvpn and ipfire
Hello everyone and thank you for the advance. I have a problem accessing a warrior from the openvpn road. Until now I was working properly on a computer I have. It works with IPFIRE and I haven't had...
View ArticleIncoming/Outgoing seperation for VPN (hacker protection only)
So I have looked at existing questions and answers, and nothing matches. Very simply all I want is inbound connections to pass through the vpn, and outbound connections to bypass the vpn altogether. I...
View Articleresolv.conf overwritten every time [duplicate]
This question already has an answer here: What overwrites /etc/resolv.conf on every boot? 8 answers I got this drwxrwxr-x 3 root tunnel 100 date and time . drwxr-xr-x 33 root root 860 date and time …...
View ArticleHow to make one app go through OpenVPN?
I have a Raspberry Pi that I use to host my websites at home, and I would like to use it as a torrent server too. How can I make one app traffic (the torrent server) go through OpenVPN without...
View ArticlePort forward to vpn client and from the client forward further to local IP
I have a raspberry pi with raspbian os which is connected to an openvpn server. Openvpn server has public IP and runs Ubuntu. I am able to reach a web application which runs on raspberry pi via public...
View ArticleOpen VPN - Networking, Trying to get site access
I have an openvpn client connecting to a openvpn server. The client is: 192.168.10.62 (local lan) 172.26.240.2 (vpn ip) I want it to be able to be on the vpn server and ping/access any 192.168.10.x...
View Articlestarting openvpn server fails with Options error: --client-config-dir fails
I'm working on setting up an openvpn server. I'm using the standard sources of debian jessie and easy-rsa as an CA. Everything worked fine until I've tried to start openvpn via init script. When I'm...
View ArticleMake user made entries in /etc/hosts permanent
I use Juniper Networks network connect to connect to the office network. Once i am inside the office network, i check the server ips and add entries for them in /etc/hosts file like, 10.199.xx.yy offi...
View ArticleOpenVpn Missing Parameter tls-crypt Config Problem
Hello there I added a new user to my server and the .ovpn file seems to have so missing things which I cant understand. I got a same config with other Keys ofc. and the same parameters for another...
View ArticleConfigure firewallD to access services on bridge from OpenVPN
I have setup a KVM host using a routed bridge (interface br0) where the virtual machines are connected. I can reach services inside the VMs on the bridge from the KVM host without problems. I can reach...
View ArticleHow to allow SSH into Terminal after connecting to VPN server using NordVPN...
I'm using Linux CentOS 7 Server and I already installed OpenVPN and NordVPN servers which I use to connect my Linux to.After establishing the VPN Connection, immediately my SSH access got...
View ArticleHow to fix this eth0 and eth1, where traffic going out via eth0 is failing?
I have two public IPs. One's connected to eth0 and one to eth1, from 2 separate routers as complete DMZ towards the LAN IP.I added this following:ip rule add from 10.0.0.108/32 table 1 # outbound ip...
View ArticleRemove redundant openvpn config service from Systemd
I used to have a config for openvpn. After upgrading to 18.04 it started behaving differently in relation to systemd, my syslog gets continuously spammed with connection attempts:ovpn-login[5191]:...
View ArticleSCP doesn't not transfer through OpenVPN
I am transferring a file through (OpenVPN 2.4.4) tunnelUbuntu 18.04 is installed on both sides.If file size more then 750 bytes I can not transfer it via SCP or rsync. I tried to fetch files from the...
View ArticleUnable to DNAT packets while maintaining source IP address
I have two Debian machines, one set up as a proxy, which I'll refer to as proxy1 and another set up as a router, which I'll refer to as router. My goal is to DNAT packets coming in from the WAN on...
View ArticleOpenVPN not default route
Using Ubuntu 18.10 (or higher, if needed), I'd like to add a VPN connection but NOT make it the default route. Tons of people have the opposite problem, but I'd like tun0 to just be another interface I...
View ArticleHelp setting up OpenVPN Client Split Tunneling on MacOS Tunnelblick
I am trying to split tunnel my VPN connection for OpenVPN Client on MacOS. I used pull-filter ignore "route " but it did not split tunnel my traffic to this IP address. Doing research at...
View ArticleAutomatically adding user and password to openvpn script
I have a working script, which allows me to do a vpn connection. It looks like this:openvpn --config VPNBook.com-OpenVPN-Euro1/vpnbook-euro1-tcp443.ovpn All is good, but I have to input the publicly...
View ArticleOpenvpn exclude ip in pool
I have an OpenVPN server running on a Linux Ubuntu box. Multiple clients connect to this server (500+) and that is why I set the server-bridge option like this:server-bridge 10.0.100.1 255.255.0.0...
View Article