port forward with openVPN to access local machine remotely
I have an OpenVPN server set up on my AWS Linux instance and I can successfully use the OpenVPN client to connect to the server using an .ovpn configuration file. My question is how can I set up port...
View ArticleClik here to view.
Why is wireguard much slower than openvpn?
I've installed both wireguard and openvpn and I found out Wireguard is much slower than OpenVPN-AS with TCP.And iperf3 bandwidth test shows wireguard supports around 20Mbps while OpenVPN-AS supports my...
View ArticleMissing openvpn routes with network manager
I'm trying to setup a VPN using network manager. When I run openvpn manually with my config, it works fine (sudo openvpn --config MyVPN.ovpn). Then when I print the routes (sudo route -n), it gives...
View ArticlePivpn stuck on connecting
I had a perfectly working pivpn installation:rpi 3 a+ on site Arpi 0 on site BBoth as ovpn servers so I can connect to both sites whenever I'm out.But I wanted to make it site to site so I followed up...
View ArticleOpenvpn client and server cannot ping each other(Connection established)
I have setup OpenVPN client and server between two VPS. I have a client and server setup, server using 10.8.0.1 and 10.8.0.2 IPs in tun interface, and client using 10.8.0.6 and 10.8.0.5 in tun...
View ArticleVPS: How to forward traffic to devices from public IP
My goal is to set up a public IP for a Android Smartphone which is running an "IP Cam" software. The interface can be accessed in local network on (example) 192.168.0.2:8080, but it has no public IP,...
View ArticleClik here to view.
What subsystem is responsible if I can connect via s2s VPN connection only in...
I have configured the following s2s VPN (in pfSense) connection which is working in general.Unfortunately, I can connect (ping, netcat, ssh) only from client to the server, but not back.If I can ssh...
View ArticleClik here to view.
No server certificate verification method has been enabled - Kali - OpenVPN
I am trying to install OpenVPN. I downloaded one .vpn from Deutch. Then just did on the terminal with this file┌──(root㉿kali)-[~/Downloads/VPNBook.com-OpenVPN-DE4]└─# openvpn --config...
View ArticleMake user made entries in /etc/hosts permanent
I use Juniper Networks network connect to connect to the office network. Once i am inside the office network, i check the server ips and add entries for them in /etc/hosts file like,10.199.xx.yy...
View ArticleCannot ping second IP address on another machine's interface
I have an OpenVPN client connected to an OpenVPN server.The server has the following routes:default via 10.109.185.65 dev eth0 proto dhcp src 10.109.185.84 metric 10010.8.0.0/24 dev tun0 proto kernel...
View ArticleUnable to generate keys for openvpn using easy-rsa
I've been following a tutorial to set up my Raspberry Pi to run OpenVPN (I'm quite new to the Pi and networking, and this seemed to be a fun intro project). However, I've run into a road block when...
View ArticleOpenVPN and WireGuard clients lost internet access despite no configuration...
For a few years both OpenVPN and WireGuard VPNs worked without any issues on my private Fedora server. I connect from mobile and Windows clients. Within the last few weeks both the VPNs lost access to...
View ArticleRoute incoming traffic on openVPN server to client
I have a VPS with a public IP that is running OpenVPN and a local server that is the only VPN client on this. Is it possible to route incoming traffic on lets say port 80 to the client? My local server...
View ArticleHow to fix this eth0 and eth1, where traffic going out via eth0 is failing?
I have two public IPs. One's connected to eth0 and one to eth1, from 2 separate routers as complete DMZ towards the LAN IP.I added this following:ip rule add from 10.0.0.108/32 table 1 # outboundip...
View ArticleProblems with openvpn on ubuntu 22.04
I'm trying to set up openvpn on the server using this guide:https://www.digitalocean.com/community/tutorials/how-to-set-up-and-configure-an-openvpn-server-on-ubuntu-22-04I got to step 10, but I can't...
View ArticleMake OpenVPN restart upon new network connection on systemd
How would you go about making OpenVPN automatically restart upon connecting to a network?The issue is that every time a network connection is lost, or if the computer is booted without a network...
View ArticleHow can I renew an expiring but still valid intermediate CA using openssl?
We have our own CA infrastructure for an OpenVPN server. We created a self signed root CA, and then one intermediate CA for each OpenVPN process / network. We created the intermediate CA with the...
View ArticleMissing openvpn routes with network manager
I'm trying to setup a VPN using network manager. When I run openvpn manually with my config, it works fine (sudo openvpn --config MyVPN.ovpn). Then when I print the routes (sudo route -n), it gives...
View ArticleConnect to fortivpn config using openvpn?
Hello guys I have idiot question about vpns.Can i connect to fortivpn config using openvpn gui?I have more connections in open and wonna to have all in one client?This is possible?
View ArticleChose network connection through xrdp
I've setup XRDP on a Lubuntu box, but it does not give me an option to choose which wireless network to connect to, nor can I connect to a VPN server like you can through the normal GUI. It uses...
View Article