NetworkManager OpenVPN creates extra/incorrect route to VPN server
I'm connecting to an OpenVPN server in Ubuntu using networkmanager. The connection establishes fine, but a route is being created that routes the vpn server's IP out the wrong interface.default via...
View ArticleSSH over internet
I'd like to access my remote devices (mostly a Raspberry Pi or similar single-board computers) over the internet without any configuration on routers. It's hard/slow to get accesses to users' routers...
View ArticleHow to invalidate the usage of a OpenVpn client without revoke it in the CA...
I created a VPN Server following the Digital Ocean tutorial (https://www.digitalocean.com/community/tutorials/how-to-set-up-and-configure-an-openvpn-server-on-ubuntu-22-04) and I created a lot of...
View ArticleOpenvpn client and server cannot ping each other(Connection established)
I have setup OpenVPN client and server between two VPS. I have a client and server setup, server using 10.8.0.1 and 10.8.0.2 IPs in tun interface, and client using 10.8.0.6 and 10.8.0.5 in tun...
View ArticleVPS: How to forward traffic to devices from public IP
My goal is to set up a public IP for a Android Smartphone which is running an "IP Cam" software. The interface can be accessed in local network on (example) 192.168.0.2:8080, but it has no public IP,...
View Articleopenvpn client cannot connect via UDP, but TCP works fine
problem:I've setup a new ubuntu 20 vm on esxi and installed openvpn. It can connect to multiple vpn servers, like protonvpn, but only through tcp, not udp.troubleshooting:Used netcat to verify UDP...
View ArticleMake user made entries in /etc/hosts permanent
I use Juniper Networks network connect to connect to the office network. Once i am inside the office network, i check the server ips and add entries for them in /etc/hosts file like,10.199.xx.yy...
View ArticleUnable to generate keys for openvpn using easy-rsa
I've been following a tutorial to set up my Raspberry Pi to run OpenVPN (I'm quite new to the Pi and networking, and this seemed to be a fun intro project). However, I've run into a road block when...
View ArticleClik here to view.
OpenVPN using Luci (OpenWRT) ssh commands to get instances and enable/disable...
Hey all I have been researching how to go about doing this but I have not really found anything on it.What I am trying to do is, use SSH luci, get a list of all my OpenVPN instances:And be able to...
View ArticleRoute incoming traffic on openVPN server to client
I have a VPS with a public IP that is running OpenVPN and a local server that is the only VPN client on this. Is it possible to route incoming traffic on lets say port 80 to the client? My local server...
View ArticleProblems with openvpn on ubuntu 22.04
I'm trying to set up openvpn on the server using this guide:https://www.digitalocean.com/community/tutorials/how-to-set-up-and-configure-an-openvpn-server-on-ubuntu-22-04I got to step 10, but I can't...
View ArticleMake OpenVPN restart upon new network connection on systemd
How would you go about making OpenVPN automatically restart upon connecting to a network?The issue is that every time a network connection is lost, or if the computer is booted without a network...
View ArticleHow to fix this eth0 and eth1, where traffic going out via eth0 is failing?
I have two public IPs. One's connected to eth0 and one to eth1, from 2 separate routers as complete DMZ towards the LAN IP.I added this following:ip rule add from 10.0.0.108/32 table 1 # outboundip...
View ArticleMissing openvpn routes with network manager
I'm trying to setup a VPN using network manager. When I run openvpn manually with my config, it works fine (sudo openvpn --config MyVPN.ovpn). Then when I print the routes (sudo route -n), it gives...
View ArticleOpenVPN connection works in CLI but not in GUI (via NetworkManager)
Using Debian 11.I set up CyberGhost VPN using the .ovpn file, client key and certificates they provide on their website. Copied all files to /etc/openvpn/. Using the following commands will allow me to...
View ArticleConnect to fortivpn config using openvpn?
Hello guys I have idiot question about vpns.Can i connect to fortivpn config using openvpn gui?I have more connections in open and wonna to have all in one client?This is possible?
View ArticleOpenvpn does not see incomming connection
My openvpn server stopped working and I cannot get any information what goes wrong.I see the packets coming in on the interface with tcpdump:09:06:33.283561 ARP, Request who-has blueberryext.home tell...
View ArticleHow to ssh into dockovpn server via vpn ip
I've deployed a DockOvpn and I want to connect to host running ovpn docker container via ssh. The connection itself seems ok. I tried to connect via the VPN ip (both inet addr and p-2-p addr) that is...
View ArticleCan't ssh to tryhackme server no matter what I do
I've been having trouble connecting to tryhackme's ssh server from my linux machine(Linux Mint 21.1 Cinnamon) the terminal displays a port 22 connection timeout error.here's the output from the...
View ArticleVPN with Network Connections GUI - no public addreses
I am trying to setup VPN connection using Network Connections GUI. To do so I pick an option to import vpn configuration and manually enter VPN credentials. So far so good, I can get connected. The...
View Article