Difficulty in connecting try hack me server in my kali machine
I went to room of Linux Privilege Escalation there I am trying to connect ssh server to my machine I also have downloaded openVpn InRegular file and then by using "openvpn file_name.ovpn" connect the...
View ArticleDocker - connect to VPN
I have Windows OpenVPN server running at 10.8.0.1.server.ovpn is:server 10.8.0.0 255.255.255.0port 1194topology subnetproto udp4 dev tunca "C:\\Program Files\\OpenVPN\\config\\ca.crt"cert "C:\\Program...
View ArticleCan Linux differentiate between HTTPS and OpenVPN traffic?
If I have a linux server that is receiving both HTTPS and OpenVPN traffic on the same port (TCP 443), and I can't change either server port, how can I redirect just the OpenVPN traffic to a different...
View ArticleCannot ping second IP address on another machine's interface
I have an OpenVPN client connected to an OpenVPN server.The server has the following routes:default via 10.109.185.65 dev eth0 proto dhcp src 10.109.185.84 metric 10010.8.0.0/24 dev tun0 proto kernel...
View ArticleConnecting to my home server through intermediary server
I'm trying to set up a server at my home using an old PC to reap benefits of it's resources, but my ISP unfortunately blocks me from exposing my network. I have another server I was trying to use an...
View ArticleNordVPN on Linux Mint
This is an unfortunately specific question, I'd much rather ask something more generic, but I'm just stumped. I install the latest Linux Mint, then I go to the NordVPN site and follow the guide to...
View ArticleAccess to client local internet and vpn server local network
When I connect to openvpn, I want to be able to access the devices in the openvpn local network and use my local internet. But I can only access local internet and openvpn server machine. Can't access...
View Articlesocat gives error (read(6, 0xf97acc0, 8192): Permission denied)
I'm trying to use socat as a port mapper to map IPv4 connections to my OpenVPN server running behind a DS-Lite IPv6 cable connection.//editI tried with a non root user and root. But I get the same...
View Articlesystemd "Failed to set up mount namespacing" in Docker container
I recently updated a Docker that uses systemd internally from Debian stretch to Debian buster.And since then it's not working.So accoding to systemctl status it fails to setup the namespace:Dec 10...
View ArticleNetworkManager OpenVPN creates extra/incorrect route to VPN server
I'm connecting to an OpenVPN server in Ubuntu using networkmanager. The connection establishes fine, but a route is being created that routes the vpn server's IP out the wrong interface.default via...
View ArticleClient route for OpenVPN Access Server
I am running OpenVPN Access Server and I'd like to push a route to every client on connection that is the equivalent of:sudo ip route add 172.17.0.0/24 via 172.27.232.1Where should I go to set this up...
View ArticleFailed to request VPN secrets #3
I am using Arch Linux with Gnome and I want to use openconnect to connect to an VPN server. I can do this at the command-line without a problem, but I can't do this with Gnome; I get the following...
View ArticleHow to refuse routes that are PUSHed by OpenVPN server?
When I establish an OpenVPN client connection over the Internet to our corporate OpenVPN server, it pushes several static routes. Unfortunately, these routes break some connectivity within my local...
View ArticleClik here to view.
OpenVPN and routing problem on OpenWRT
My home topology:router1 (192.168.1.1) - D-Link dsl2540u server with static IP available from Internet (ADSL via ppoe). 4 LAN ports.router2 (192.168.1.2) - D-Link DIR-300 with OpenWRT. Plays role of...
View ArticleOpenvpn client and server cannot ping each other(Connection established)
I have setup OpenVPN client and server between two VPS. I have a client and server setup, server using 10.8.0.1 and 10.8.0.2 IPs in tun interface, and client using 10.8.0.6 and 10.8.0.5 in tun...
View Articlesystemd service on connected/not status of tunnel
I am using OpenVPN as a client on Ubuntu 22.04 without the persis-tun option. Thus, when OpenVPN server comes available, eventually OpenVPN will connect and create a tun0 device. When the server is not...
View ArticleOpenVPN connects to the Server successfuly but no internet access
I want to setup an OpenVPN Server and after a week of trying day and night (no Linux Knowledge) I was able to successfully connect to the Server using OpenVPN GUI but now that I can Connect there is no...
View ArticleOpenvpn systemd service won't connect automatically to profile
I am running an OpenVPN client on a Debian 12 machine.In /etc/openvpn/ I have the configuration file (client.conf) and another file (login.txt) with username and password.When I try to reboot or...
View ArticleVirtualBox guest can't reach OpenVPN subnet that is accessible to the host
I believe that my problem is similar to this question on accessing VirtualBox guest via VPN, but not quite. I am trying to go the other way: I am trying to reach a destination that is accessible to the...
View ArticleOpenvpn client and server cannot ping each other(Connection established)
I have setup OpenVPN client and server between two VPS. I have a client and server setup, server using 10.8.0.1 and 10.8.0.2 IPs in tun interface, and client using 10.8.0.6 and 10.8.0.5 in tun...
View Article